You can now buy an ultrasonic cleaner with 3 months interest free credit. Buy now, pay later with “PayPal Pay In 3”.
There are times when you might need a new ultrasonic cleaner, either for business or pleasure, but don’t have enough funds in the bank. Using PayPal, you can have 0% interest spread over 3 months. Split your purchase into three interest-free payments, with no set up fees or charges. Stay in control and get the things you need without stressing your budget.
What is PayPal Pay-in-3?
PayPal Pay in 3 is an interest-free loan that lets you split your basket into 3 payments. The first is due at time of purchase and subsequent payments due every month on the same date. It’s a great way to spread the cost of a new ultrasonic cleaner and manage your budget more effectively. Please note that Pay in 3 is a form of credit. Carefully consider whether you can afford the repayments to avoid late fees and possible impact to your credit score.
How do I get an ultrasonic cleaner with 0% credit?
Make your purchase in the normal way on Best Ultrasonic Cleaners website. At the checkout select the main PAYPAL button on the payment screen. You will then see the option “pay later”, then “pay in 3” and then follow the instructions. Get a decision on whether you’re approved in seconds and then complete your purchase. Make the first payment immediately, the remaining two payments every month on the same date.
Minimum spend £45. Maximum spend £2000 (subject to checks)
Eco Ultrasonic carburettor cleaner fluid gives superb cleaning performance at low temperatures. Save on heat up time and reduce energy consumption. The eco carb cleaner solution is a micro-emulsion capable of solubilising oily, hydrophobic substances in a bi-phase composition. This makes it highly effective at cleaning. Also this removes the need for chlorinated solvents, hydrocarbon solvents and high pH caustic solutions. It is very effective at a lower working temperature. Use between 15°C and 45°C for lower energy use and short heat up time. If your workshop is cold in winter, this product could be for you because it takes up to 50% less time to reach working temperature.
Eco Ultrasonic Carburettor Cleaner & Super Eco are pH neutral and environmentally friendly solutions, specially made for use in ultrasonic baths to clean at a lower temperature. Available in 2 strengths:
10:1 (standard Eco concentrate)
40:1 (super Eco concentrate)
The eco carb cleaner solution has been specially formulated to remove oil residues, grease, general dirt, carbon, aluminium oxidation etc. from engine parts. These include carburettors, fuel injectors, heat exchangers etc. Built-in corrosion inhibitors make it safe to use on all metals and it will not damage or darken components.
Working temperature of the ultrasonic bath should be between 15°C and 45°C. It works well in hard or soft water.
The eco carb cleaner is non hazardous for disposal (i.e. it can go down the drain) but please be mindful of the contamination from what you are cleaning. If the level of soiling is high please check your local disposal regulations.
The fluid can be used many times until it looks dirty. There’s no specific rule when to change it, but the idea of an ultrasonic cleaner is for deep and thorough cleaning. If your fluid looks like pea soup, it’s time to change it.
Biodegradable – friendly to the environment
Non corrosive to metals and aluminium
Can be used in hard or soft water
Low working temperature – optimum is 40°C
Removes petrol “varnish” residue
Brightens alloy castings
Subscribe to get access
Read more of this content when you subscribe today.
There’s lots of talk about dental surgeries having to be “HTM 01-05 compliant“. It’s a good thing and in summary it ensures cleanliness is of uppermost importance in the way instruments are cleaned.
What is an HTM 01-05 compliant ultrasonic cleaner?
The machine needs to be able to record every time the machine is used and detail the date / time, name of the user, serial number, unique cycle number, and fluid temperature.
Where can I buy an HTM 01-05 compliant ultrasonic cleaner?
Obviously I’m going to suggest our website and THIS MODEL
When it comes to ultrasonic cleaners, the machines need to be of a certain standard and must have the functionality of recording and storing data for each and every time the machine has been used. This creates a log that should the CQC (Care Quality Commission) come to pay you a visit, you can produce historical records to prove you’ve been doing things correctly, over time.
We are delighted to now offer an ultrasonic cleaner that is 100% HTM 01-05 compliant.
With touch screen control of the time and temperature settings, the new series of ultrasonic tanks has a brushed stainless steel finish. This latest model has degassing for rapid removal of air from the cleaning fluid. As a result, this gives a thorough and deep clean because the fluid is working as efficiently as possible.
The machines are available in 3, 6, 10 and 22 Litre sizes. All of the ultrasonic cleaners have a digital LED readout with touch screen controls and degassing, along with a stainless steel tank and body. The ultrasonic bath will remove dirt and most physical matter and can be be used for many applications including cleaning electronic and mechanical parts. For the best results always use an appropriate cleaning fluid or solvent suitable for the item being cleaned. The black satin finish is easy to clean and scratch resistant.
Touch screen temperature adjustment: 30-80 degrees C (in 5 degree steps).
Touch screen timer: 1-99 minutes.
No fingerprints left on the surface – easy to clean.
Advanced smart touch panel operation.
Sensitive touch operation (high switching speed under 150 ms.)