

Our ultrasonic carburettor cleaning fluid is perfect for cleaning carbs, valves, fuel injectors and engine parts etc. The carb cleaner safely and quickly removes contaminants including general soiling and dulling, oxidation, carbon, petrol residue and grease etc.
The fluid works very well with alloy and aluminium castings by removing physical dirt. Also it cosmetically removes the dulling that occurs over long periods of time. It won’t make a component look the same as when it was new, but results are very impressive. The cleaning process won’t damage, corrode or darken metal components. It is safe for brass, aluminium and other sensitive metals and rubber O rings.
Using the concentrated fluid
Mix the concentrated fluid 1 part solution to 10 parts water. (1 Ltr bottle will make 10 Ltr of working solution). Keep using the fluid until it looks dirty. There’s no rule about when to change it, however an ultrasonic cleaner is for deep cleaning. When the solution looks like pea soup, it’s time for a new mix.
Directions:
Mix the concentrated carburettor cleaning fluid with water at a ratio of 10:1 (10 parts water to 10 parts cleaning fluid). For heavily soiled components, the ratio can be strengthened to 7:1. The working temperature on the ultrasonic cleaner should be between 50 – 80 degrees centigrade. After cleaning, rinse the parts with clean water and leave to dry.
For more detail on mixing the carburettor cleaner click HERE
